- Which fork oil for '00 YZ 250?
- Major news!
- YZ250 spring rates
- Fork Rebuild Advice Please?
- 00' CR250 tips?
- Linear vs. Progressive
- Rocky, rooty trail settings.
- fork seals stoped leaking
- shim shuffle - KTM WP forks
- Linkage Bearing Cages? What the........
- Im new to suspension so please bear with me....
- Suspension and degrees
- Technical Questions on Spring Design
- Suspension work .
- Need a good revalve company
- Marazoochi vs WP
- Jeremy, need help with spring rates
- Race Tech Gold Valves in a 2000 CR250
- YZ250F
- hopups for a TTR-125L
- Understanding....rebound
- opinions on my valve stack
- Jeremy:Honda/Showa Works Fork Kit
- Lets talk about free bleed.
- shim shuffle - KTM WP forks Part 2
- Understanding....midvalves...
- New fork springs tight on the plastic spring guide
- 99 CR80 wants to tank slap
- PDS Spring Rates?
- clickers?
- 96' XR200 shock.......IS it rebuildable??????
- Need help with 96 RM 80 Suspension
- Rightside up 80īs 46mm forks
- Contractive Suspension
- fork dust boots
- New DRZ Suspension
- fork compatability on XR
- 95 CR 250 Fork oil question
- KX 65 springs
- free sag too low
- Pro Circuit for my KDX 220
- MX-TECH ( john korea)
- Marzocchi
- Suspension on older bikes vs. newer bikes.
- Can't get to correct race sag
- How to measure pre-load on conventional forks
- Source for Ti Springs
- revalve? respring?
- KX 250 Rear Suspension
- fork booties
- 91 Cr250 rear shock leaking??
- 01 CR Fork Revalve
- Showa fork and Works shock for XR 100?
- 2000 CR250 rear shock
- woods suspension or motocross
- Suspension setup
- Rear shock compression
- Help ID KX 80 Forks
- 1993 kx 250 fork oil level??
- Need shock shafts ????
- psi for late 80s fork
- What oil for steering damper?
- refreshing fork seals ??
- raiding forks to improve turning
- unequal rate fork springs-OK to do?
- how soft/stiff should my suspention be?
- WER damper question......
- jeremy:how to set up suspension on '91 CR125R?
- dialing in 01' YZ426 suspension
- Shocks vs forks. Should they match?
- Stupid shock question
- Blown shock blader
- Know a good suspension page?
- Spring Choices
- mx-tech (woodsrider)
- Fork oil height in my bike
- suspension travel on lowered 94' kx80
- Pro action suspension....
- 1999 CR125 Fork Seals
- Should I change my springs??
- Dropping trees ?
- Rebuilding rear shock on 83 YZ250
- KX80 fork weight?
- Head Shake on my '98 YZ400
- mid valve spring
- Anyone ever have this problem?
- 2001 KTM 125SX suspension questions
- Used Springs?
- which clicker is which
- Rear Wheel Bounce
- Buying a bike and have a few ????
- Any advice??
- Tool making-50mm fork cap wrench
- Who makes the best manual for monoshocks?
- Enzo's fork bladder kits..
- cr500af suspension
- compression stack removal
- Do I really need revalved suspension??
- Jeremy/others, recommended oil height 01yz250?
- How Hard Is It To Bend The Forks?
- What should my suspension settings be?
- Suspension Settings for 01 CR250
- Do Tie Downs Damage Suspension?
- OFFROAD SUSPENSION SET-UP!!
- assembling shock on Kdx
- More WER damper q's.......
- Help! No compression damping
- how far to raise forks???
- Wouldt't springs be good enough ?
- mike alessi ttr125
- Rear suspension sag
- ttr125L forks?
- Torquing Triple Clamp Tube Bolts
- Thank You MX-Tech
- Rear shock seal removal and comp adjuster removal?
- one more question on KDX shock
- General spring question for Jeremy
- What can I do to improve my XR100R suspension?
- Suzuki RM80 fork oil level
- Need help dialing in suspension on '01 RM 125
- isitsafeto take off the ttr125Lforks sqirle cover
- Fork Seals: OE vs Aftermarket
- Fork Seal Leakage
- Will this monoshock fit on my bike?
- damper rod not fully extending
- Tank Slap
- setting up Marzzochis on Husky
- 01' CR250 Jeremy, What Mods?
- 250F Fork seal already!
- nicked push rod
- Rear suspension for 00" Kx80
- rebound?
- is the rear shock on a 86 xr 600 rebuildable?
- No markings on fork springs
- 00KX250 Fork Disassembly Question
- www.trakcontrol.com
- Anyone make a manual just for monoshocks?
- Thinking out loud about forks
- Best Fork Seals ?
- Changing only whats needed.
- .44 springs in YZ 250
- WP Question
- rechromed front forks?
- XR200 Suspention question
- Seal Head Driver?
- Both Ends???
- New springs...to stiff?
- 01 WP 43 USD fork disassembly procedures?
- Freakin Needle Bearings
- 98kx 250 setting for trail riding?
- Honda CR 250 93 fork not working right
- front suspension problem!
- kicks like a mule
- Update
- Fork brace question
- revalve stock valve assembly
- RMX fork tuning
- Seat Height question
- front forks WAY too stiff, suggestions.
- Bolt on the front suspension does not work
- Solva suspension
- 50mm WP fork valving
- Respringing.....what size springs?
- Question of the month..!! Revisited
- My questions to all the readers(not jer :) )
- Jer, all; what spring rate, oil height, preload?
- WP Fork & Shock Tools.
- How can 7mm sag feel so different?
- Suspension for chubbies
- Bumpsticks suspension
- Fork Leak nightmare on 95KX250
- 2001 CR settup ?
- TT-R250 Rear Suspension Setup help?
- am i hurting my suspention?
- Problems w/ Mobil Synthetic ATF?
- respring/revalve report DRZ400e
- 2001 CR250 Suspension Setup.
- Tie Downs
- YZ250 Spring Rates /180lbs
- YZF250 Spring Rates /180lbs
- Spring length difference
- Lowering YZ-125 for shorter rider??
- Does Anyone Have Fork & Shock diagrams
- Fork Leak?
- Help for '93 DR350s ?
- Yz 125 suspension help
- suspension tips for 400sx?
- New Designs From the Karaoke Room
- front forks
- CR250 springs
- Fork Saver ? Where
- Spring replacement......the cheating way??
- FORK OIL QUESTION!!!
- Suspension Parts..What are their functions
- Active coils?
- Rommel, you magnificent buzzard! I read your book
- Suspension Write Up - Jer's work on trial
- KDX250 suspension questions...
- Front fork causing washout?
- Fork quick bleeds
- ktm 125 exc all sprung out
- remove forkoil to "soften" compression?
- Nice smooth suspension, leg pain
- Tools Required???
- Can't reach ground(I bought longer legs)
- Wrench for '01 compression adjuster[KYB]
- Amsoil Synthetic ATF?
- Changes in forks compression over the day?
- Fork leak on the bottom of the fork
- How to stop headshake on acceleration bumps?
- back wheel kicks up off jumps
- ow,i crashed 5 times.
- Rebuilt shock has no compression dampening?
- ? about used forks....
- KTM/WP R509 fork upgrade - update please
- Zokes revisited
- WR 426 time to go faster...
- Front seals: Wont stop leaking!
- Adjusting KX500 Suspension.
- Suspension tuning literature
- 1+1 does not always equal 2!
- shim shuffle final - KTM WP forks Part 3
- Kx 80 compression damping adjustment
- Is my suspension for me
- After EVERY ride?!?!?!?!
- Cr250 '01 Forks - Can SS7 oil be used?
- My TTR
- Beginner information
- KTM WP Fork Service Manual F/S
- Revalve advice
- CR250 Sub Frame
- Oooppps!!!!!!!
- KX80 soft shock problem...
- Just An Inch Lower
- MX-TECH, I couldn't reach you through your web page. Help!
- Sand and Front Forks Question
- Rebuilding a seal head assembly?
- New Boingers for YZ250F!
- KTM Progressive Springs
- ktm air suspension
- Bad KYB Shock Service?
- Forks - Inverted VS Conventional
- Aligning front forks
- Setup Options to Control Understeer
- KYB adjustment
- RMX lower shock mount spacers?
- progressive or straight rate?
- Maxed out compression.
- Need Measurements(SKETCH)43mm fork seal driver
- suspension balance - is this bad?
This is the text version of DirtRider.Net
Click Here for the Full Version
Text Version Home
View Full Version : Suspension Q&A with Jeremy Wilkey
vBulletin v3.0.7, Copyright ©2000-2009, Jelsoft Enterprises Ltd.