This is the text version of DirtRider.Net
Click Here for the Full Version

• reed and exhaust options??
• cr250:too many teeth.??
• oil for rm 250 and sx 250 mod 2003?
• New owner with a blown engine.
• why does my yz only have 5 gears
• Oil leak
• Is my jug OK? (Picture Inside)
• 03 cr 250 oil leak...help
• '97 cr250r question
• 85 rm 125 tiny window of power ..ideas??
• will a carb rebuild kit solve all ???
• Yamaha YZ 250
• kx500 wont run right carb adjustments?
• 96 cr 250 info
• any service tips for 96 cr 250
• what NOT to do when pressure washing my bike ?
• First time at track
• Dent In My frame
• tightening a suspension??
• 2004 cr250 motor in a '94 cr250?
• YZ250 Air Filter, dumb question
• '02 CR125 Frame for an '03 CR250
• 1995 Yz 250
• Splitting the cases on an 03 yz250
• Attn: 2002/2003 CR250 Keihin PWK Converts
• 2001 RM 85, Anyone know where i can get a nice graphic kit for this bike?
• '00 CR250R ... wil '02 stickers fit?
• Used Dirtbike?
• Help - rebuilt clutch but will not engage - no neutral
• Need advice quickly
• kx250 straight pipe?
• carberater yz 125
• KX144? and some
• Need advice: 1994 Kawa KDX 250
• spark plug ??
• 03 kx250 smokin' but don't think it's top end time yet
• can someone help!!!!
• 1991 CR250 Forks
• timing advance/higher octane/machining head down
• rm shifting probs split cases
• Black Pro Circuit Pipe?
• New guy to bikes
• 1996 yz 125
• It's a cr250 but which year?.
• CR 500 rod replacement
• Fork seal question/ 01 RM250
• 1990 rm 125 review
• Can't figure this out
• Spark Plug?
• yz250 first bike
• + 7oz is not enough.
• I'm getting a 1993 CR 125, what upgrades/ modifications should i put on it?
• help: how to keep new pipe from rust
• Yamaha runaway engine problem
• Maico 700
• Which 250 MX bike is best for woods
• Shifting
• YZ250 Throttle Position Sensor (TPS)
• Changing front wheel bearing thread
• Couldn't find the air screw on 83 KX125 Mikuni Carb
• CR250 Should I sell or Keep?
• power valve
• 2001 yz 125 lost clutch pressure
• 95 cr250 jetting issues
• Looking For KX 125 Information
• Jerky clutch.
• 88 cr250 vs 92 rm250
• pieces of piston
• Goodbye 4 Stroke Hellooo Yz125
• 2 stroke help in Iraq (no fuel in cylinders i think)
• CR250 Engine Parts
• 82 yz 490 j problems
• CR250 Shock Compatibility
• 125rm cleaning
• 00 YZ250 Jetting
• Problem with forks on an '03 KTM sx 125???????
• 86 kaw kx250 too rich mix
• procircuit "the works" vs. fmf "fatty"
• Did a few cheap mods to the bike...
• clutch not disengaging
• How do you get that RED BAKED DIRT and GREASE of a dirt bike engine? HAVE PICS !!!!!!
• tranny rebuild
• 1996 yz 125 needle an clip
• Cr80 Problem!! (help)
• fuel mixture screw
• 1989 rmx250 carb set up?
• New Guy
• carb leaking
• YZ490 fork oil level?
• 95 WR 250 Yamaha
• 93 yz 125 cylinder
• Goniometer ???
• A Few Questions
• 01 yz250 jetting questions?
• CR250 and CR500 How are they different?
• 86 yz125 hotter plugs?
• Best Cylinder Replating
• 1990 yz250
• Looking for some KX's to test stators on!
• rear tire on my cr?
• gearbox box oil in my cr?
• YZ250 Compression
• yz125 blown head gasket?
• Rm 125 Water On Plug Will Not Crank. Help!!
• 1985 YZ 80 Resto Project
• Going to buy a Used 2 stroke
• 1988 yz125 crankcase sealing
• RM 250 wont idle
• 1983 Kx80
• Stealhy weight, do I need a different cover?
• rode an 03 rm 125 today.
• new plug,reeds and air filter...runs GREAT, won't idle
• YZ250 spark arrestor/silencer issue??
• YZ 125 CDI Box
• 94 CR125 Reeds Help
• found a 2001 rm 125 bottom end
• Where do I begin?
• yz125 inner clutch cover
• help from older MXers
• Fork Oil Height help
• What Jets Do I Get For My Cr125
• YZ 125 that wont Start!
• 1988 CR125 plastics
• 2002 rm125 clutch basket issues. please answer asap(race day tommorow)
• Yz250 and cruising at slower speeds?
• Klotz oil questions?
• old kx500 need help
• smokey1989 rmx250
• clutch help
• graphics
• '01 yz250 what plug?
• Kx125 front fork.
• Help, Rm 125 Tire pressure
• RM80 Piston to cylinder size
• Ktm 550 wont start
• Harpack tires suggestions
• What gas:oil ratio do you use for your 500?
• Water got into transmission?
• Normal break in or damage
• YZ 250 gearing/sprockets?
• Machine work advice
• Another Clutch Issue, HELP
• VM34 Slide?
• How much oil for crankcase
• stripped screw on carb bowl!
• 1996 yz 125
• yz250 won't idle, runs great
• yz250 spark arrestor suggestions
• cr125 trouble no acceleration
• another bad bottom end
• 98 kx 250 clutch
• Bike Wont Start!!!
• RM 250 fouling plugs!
• Need a kick starter rm250 01 any thing else work
• completely lost.
• 1998 rm 125 transmission PLZ HELP
• 2stroke Oil and mix ratio recomendations?
• Bike wont start after rebuild!!!
• What Gear box / transmission oil for my rm 125????
• Another prob with the engin rebuild!!!
• Lookin at gettin a project
• 1981 rm 125
• chain snapped today.
• which reeds are the BEST ??
• 1998 rm 125 transmission PLZ HELP
• The stable.....
• kick start problem/how to remove clutch?
• Clutch Problems
• Picked up a new bike!
• old vs newer
• Will stock stator run an led headlight?
• HELP coolant leak YZ250
• need advice on yz125 gasket change..
• 03 cr250r expansion chamber
• 86 yz rebuild
• piston to a steel sleve?
• stalling issue
• boysen reeds
• ktm 250 sc (05)
• kx 250 piston
• Looking to buy a 2006 RM 250
• 2001-2004 rm 250
• Burning spark plugs to much!!!!!
• 1991 RM250 Set Up
• rm 250 powerband problems
• 1996 yz 125
• 03 kx250 clutch repair question
• starting trouble
• Transmission oil bolt thread - damaged thread neck
• looking at a kx 125
• plug queston
• gas an oil mixer
• Question about 96 KX125 my friend just got
• help me, think i killed it.
• New plastics
• Husqvarna cr250 not working...PLEASE HELP!!!
• 2000 CR80 Expert - Parts Search - Story
• KDX runs fine then dies and shifter stuck.
• 98 YZ125 carb question
• What's the best for cleaning Power valves

vBulletin Copyright ©2000 - 2009, Jelsoft Enterprises Limited.
vB Easy Archive Final ©2000 - 2009 - Created by Stefan "Xenon" Kaeser