DirtRider . Net MX, SX, Arena Cross, Off-Road Community
Dirt Rider . Net Text Version Home
Dirt Bike Dirt Bike Dirt Bike Dirt Bike

This is the text version of DirtRider.Net
Click Here for the Full Version


Pages: 1

Wheel bearings

(Click here to view the original thread with full colors/images)

Posted by: crazybrit---------------------

Anyone know the bearing numbers for the wheels? (1998).

Do people use -2RS bearings (sealed on both sides)? This is what I normally do when the OEM is sealed on one side only or totally unsealed. Not sure here.

My 98 hasn't had a lick of maintenance done on it and I'm in the process of replacing the linkage/swingarm bearings (other thread) as several are totally seized ... which got me thinking of replacing the wheel bearings also.

I have a Pit Posse bearing puller so getting them out is easy.

What about the seperate grease seals. Looking in the manual there appears to be a seperate seal distinct from the bearing. Are these a commonly available item (from a bearing store) or only from OEM (or in the Moose kit)?

Tony


Posted by: StuckinJersey---------------------

I used the OEM parts when I just mine last month. Here are all the OEM parts and numbers you will need.
Front : Bearings (2) # 601B6202UG , Grease Seal # 92049-1176 (you only need one because of the odo hardware.) , Circlip-type-C (35mm) # 481J3500.
Rear : Bearings (2) # 92045-1239 , Seals (2) # 92049-1203 , Snap Ring # 92033-1041
As far as a store to get them at? I only know the Kawa dealer so I can't help you on that one.

Good luck with it>!


Posted by: kelseybrent---------------------

Front:
2 Bearings 6202 2RS
1 Seal 20 X 35 X 4.5
1 Seal 50 X 62 X 7
Rear:
2 Bearings 6004 2RS
2 Seals 25 X 42 X 5

You can get the bearings at any bearing house, or online at an industrial supply like MSC. I don't know about the seals though.

www.allballsracing.com sells complete kits with bearings and seals. $11.06 for front and $16.96 for rear.


Posted by: JasonRan---------------------

I used All Balls wheel bearings in my XR and they worked great. Great price too. Plus, I like their logo and you get a free sticker.


Posted by: crazybrit---------------------

Quote:
Originally Posted by kelseybrent
Front:
2 Bearings 6202 2RS
1 Seal 20 X 35 X 4.5
1 Seal 50 X 62 X 7
Rear:
2 Bearings 6004 2RS
2 Seals 25 X 42 X 5

You can get the bearings at any bearing house, or online at an industrial supply like MSC. I don't know about the seals though.

www.allballsracing.com sells complete kits with bearings and seals. $11.06 for front and $16.96 for rear.


Thanks for the info. I just checked the rear wheel since I have it out. The manual shows the bearings being unsealed but I had -2RS. I popped the outer seals off each bearing. One bearing was fine but the other was jammed up pretty good. I just popped them both out and will go replace. Thanks. I'll get two new 6202s for the front also.


Posted by: QLD_KDX---------------------

I found that it's easy to get aftermarket bearings, but the grease seals are thinner than the narrowest common seal so it's OEM for those (unless you have the seals sitting out proud from the hubs which is OK for all except the odo side seal at the front).
Get a quote for the OEM bearings first, because sometimes Kawasaki can surprise you and have certain bearings cheaper than aftermarket (I said sometimes dammit!)

Andrew



Text Version Home





vBulletin Copyright ©2000 - 2009, Jelsoft Enterprises Limited.
vB Easy Archive Final ©2000 - 2009 - Created by Stefan "Xenon" Kaeser