DirtRider . Net MX, SX, Arena Cross, Off-Road Community
Dirt Rider . Net Text Version Home
Dirt Bike Dirt Bike Dirt Bike Dirt Bike

This is the text version of DirtRider.Net
Click Here for the Full Version


Pages: 1

All Balls Linkage bearings? Stupid question?

(Click here to view the original thread with full colors/images)

Posted by: jhkinzinger---------------------

I have a 99 kdx 200 and am replacing the linkage bearings, the all balls kit comes w/ the linkage bearings and "includes lower shock bearing". This leaves me w/ 3 pair of larger diameter bearings/sleeves and 1 single small bearing/sleeve. I only pulled out 2 pair and the single bearing/sleeve from the linkage. So where does this extra bearing pair and sleeve go? Thanks for the info.


Posted by: Big Bore Stroker---------------------

Quote:
Originally Posted by jhkinzinger
I have a 99 kdx 200 and am replacing the linkage bearings, the all balls kit comes w/ the linkage bearings and "includes lower shock bearing". This leaves me w/ 3 pair of larger diameter bearings/sleeves and 1 single small bearing/sleeve. I only pulled out 2 pair and the single bearing/sleeve from the linkage. So where does this extra bearing pair and sleeve go? Thanks for the info.


Did you replace the bearings in the swing arm where the linkage connects to?


Posted by: jhkinzinger---------------------

That was it, I actually realized it when I went to change my swingarm bearings. That single linkage bearing on the swingarm was the only one on the whole bike that was not rusted out completely. Somehow it managed to be in good shape but I figure I'll chane it anyway. Thanks.

JK



Text Version Home





vBulletin Copyright ©2000 - 2009, Jelsoft Enterprises Limited.
vB Easy Archive Final ©2000 - 2009 - Created by Stefan "Xenon" Kaeser