Dirt Rider . Net Text Version Home
Pages: 1
1981 KDX 175 Kickstart Lever Stop
(Click here to view the original thread with full colors/images)
Posted by: Charger71---------------------
I have a factory manual for my bike...
I reassembled my bike after changing the crank pin and bearings. It was done at a shop on a jig and balanced.
After getting the covers on, I tried to turn my engine with the kickstart lever. It turned nicely, but the lever never "bottomed" out. It goes all the way to the foot peg now. What did I miss? Did I forget to do something?
Some facts, I didn't dissassemble the starter mechanism. I only pulled it out of the engine case. I am unsure of the spring tension and orientation.
Any advice would be nice.
thanks, Charger71
Posted by: richp---------------------
I thought thay all went to the peg.
Posted by: AwfulSmokey---------------------
take your kick starter off the spline and move it to the left and slide back on. You can adjust how it starts and stops by the spline..
Posted by: Charger71---------------------
Thanks for reading my question and responding to my questions.
After getting the answers above... I checked everything again. Appearantly it IS right. I just didn't remember the lever almost hitting the peg.
Anyway, thanks y'all...
Charger71
Text Version Home
vBulletin Copyright ©2000 - 2009,
Jelsoft Enterprises Limited.
vB Easy Archive Final ©2000 - 2009
- Created by Stefan "Xenon" Kaeser
