DirtRider . Net MX, SX, Arena Cross, Off-Road Community
Dirt Rider . Net Text Version Home
Dirt Bike Dirt Bike Dirt Bike Dirt Bike

This is the text version of DirtRider.Net
Click Here for the Full Version


Pages: 1

1993 CR125 Help

(Click here to view the original thread with full colors/images)

Posted by: sk8er_719---------------------

I searched but couldn't find anything regarding the problem i'm having. I'm in the process of pulling the motor and i get to the swingarm bolt. I cannot figure out how to get this little guy out.
I have pics but don't know how to upload them. Any help is appreciated.

Thanks
Mike.


Posted by: minutz---------------------

Your talkin about the long bolt that goes through the frame and engine right? It should come out by taking the nut off and just drive it out with a brass punch or something softer then the bolt. Have seen these become one with the bearings due to rust, lots of penetrating oil might help.


Posted by: sk8er_719---------------------

Quote:
Originally Posted by minutz
Your talkin about the long bolt that goes through the frame and engine right? It should come out by taking the nut off and just drive it out with a brass punch or something softer then the bolt. Have seen these become one with the bearings due to rust, lots of penetrating oil might help.


Yes. Thank you, I'll try that.



Text Version Home





vBulletin Copyright ©2000 - 2009, Jelsoft Enterprises Limited.
vB Easy Archive Final ©2000 - 2009 - Created by Stefan "Xenon" Kaeser