Dirt Rider . Net Text Version Home
Pages: 1
1991 cr 125 fork revalve
(Click here to view the original thread with full colors/images)
Posted by: ryanrambo24---------------------
okay i did some searches for revalving these forks and couldn't find what i wanted.
first these are unique forks, the compression valve is in the damping cartrige, threaded into it.
anyways i have done a couple DIY revalve kits on forks and shocks.so i'm SLIGHTLY up to speed with the work.
and this bike is in good shape and i've had it ten years and i want to start riding it when i take my yzf to the track. so as far as $$ i don't want to go deep and get a kit. i purchased some 6mm shims from mx-tech. and was wondering if anyone had some shim stack specs from this model or similar or any ideas the stack up goes:i'm at about 180 with gear. ride mx intermediate rider
valve
22x.10
21x.15
19x.15
17x.15
15x.10
13x.10
12x.25
17x.15(4)
base washer
I was thinking about this
22x.15 lsc
22x.10
12x.10
22x.10 hsc
19x.10
17x.10
14x.10
13x.10
12x.10
11x.10
I have used this stack before but these forks are pretty rough stock.
Posted by: ryanrambo24---------------------
anybody??
Text Version Home
vBulletin Copyright ©2000 - 2009,
Jelsoft Enterprises Limited.
vB Easy Archive Final ©2000 - 2009
- Created by Stefan "Xenon" Kaeser
