Dirt Rider . Net Text Version Home
Pages: 1
Drz400s jetting
(Click here to view the original thread with full colors/images)
Posted by: markkaw---------------------
Two buddies and I have drz400s' that we'll be taking to Colorado in July. Does anyone know what main jet sizes we'll need to use? We have the stock jetting right now. Thanks! Mark
Posted by: RM250'er---------------------
Great website for DRZ400
www.thumpertalk.com
Posted by: markkaw---------------------
Ya that is a great site, but it has been down for the last couple of days and I thought maybe someone over here would also know the answer to my jetting questions.
Mark
Posted by: dirt boy---------------------
I purchased a 2001 drz400 3 months back. i've not changed the jetting
yet. have checked myn plug looks fine and has been running great!
my stock jetting that was in my bike was a 145 on the main.
have not checked pilot yet . though i'm going to be trying a size or two up to see if i get any better performance. i'm running stock header and a fmf iv.
have't gotton up past 11,000' yet but that will be soon i hope.
Posted by: Magellan---------------------
If the stock jetting works for you now, you can use the chart on the following link to figure out what you'll need in CO. Now, I had a hard time understanding exactly how I was to use the chart, but maybe you can figure it out.
Also, I have a jetting_calculator spreadsheet (XL) that is much easier to use. Just plug in your current jet sizes, alt and temp, and the alt and temp of where you want to ride, and it kicks out the new jet size.
I was going to use it to get jets for a trip to Tahoe, but we ended up not taking our bikes, so even though I bought the jets, I never used them. Sorry I can't vouch for either method, but the spreadsheet did seeem reasonable.
I can email to you if you'd like.
Mag
Here's the link: carb101
Text Version Home
vBulletin Copyright ©2000 - 2009,
Jelsoft Enterprises Limited.
vB Easy Archive Final ©2000 - 2009
- Created by Stefan "Xenon" Kaeser
