Hey guys, I bought a 99 kx 250 and got burned (long story) :flame: The clutch was acting all weired not disengaging all the way and then when I let it out it was real grabby and would make a noise when I let it out. I took it apart and the hub and basket have some grooves in them but not real deep. The clutch pull was real nice and easy, it just didn't disengage all the way uintil you held it in for like 10 seconds and even then it would grab occasionally while rolling own hill with the clutch in. With all the plates removed the basket has a bit of free play rocking it back and forth and when I rotate the hub it seems like the shaft it is on is bent. The hub runs up and down slightly in relation to the basket. I will get the hub off tomorrow, maybe the washer is missing back there. Anyone have any ideas? :ugg: Who is the guy that repairs baskets? Thanks for all replies.