Jun 12, 2005
229
0
Ok im having problems with my clutch on my cr 125 here is what is happening. I cant start the bike in gear the the clutch in(the bike kicks forwards and starts for a second or 2. When i push the bike with the clutch in in gear it rolls but its really hard to push. And when im riding and pull the clutch in it still feels like its giving it gas when i give it throttle. The part on the perch where you adjust the play is pretty much stripped and barely holding in that screw in part. Could this be my problem? Or is it the actual clutch.

ps: I have no knowledge about clutches :bang:
 

Chili

Lifetime Sponsor - Photog Moderator
Apr 9, 2002
8,062
15
Well if the perch adjustment is stripped it may be as simple as properly adjusting the clutch. Until you can do so it's pretty hard to diagnose where the problem lies. Start by replacing your clutch perch and take it from there.
 
Top Bottom