LESPAUL1283

Member
Apr 8, 2009
1
0
What's Up Guy's , My Cr 85 Water Pump Seal Wont Stop Leaking At The Weep Hole, I Replaced It 3 Time's And Still It Drip's, Like A Stuck Pig On The First Two And Now When The Motor Is Not Running. Thers No Water Blocking, Water Cooler Is Clear,brand New Top End, Seals, Hose's. For The Love Of God Is There Something I'm Over Looking
, I'm About To Toss It Out The Window!!!!!
 

IndyMX

Crash Test Dummy
~SPONSOR~
Jul 18, 2006
5,548
2
Amo, IN
If you've replaced the seal, and it still leaks, I'd look at replacing the water pump shaft next.

I'd also look pretty hard at the water pump bearings.
 

Jasle

Sponsoring Member
Nov 27, 2001
1,358
0
yup. post a pic of your impeller shaft. the seals tend to put grooves in them. I replace bearings, seal, shaft as a kit. Otherwise I'm in there doing it again right away.
 

sharky243

Member
Dec 14, 2008
246
0
Shaft and bearings, and another new set of seals should take care of the problem
 

Welcome to DRN

No trolls, no cliques, no spam & newb friendly. Do it.

Top Bottom