rmrider45

Member
Sep 8, 2008
171
0
IndyMX said:
427-11 is just a part number.

http://www.jtsprockets.com/52.0.html?&L=0&sel_uid=5427&p=

There is no 427 chain size..

As far as I know, dirtbikes usually only use 520, 428, 420.

But why would you want a 11 tooth sprocket? that's a bit small..


so it will work?

i wanted a smaller sprocket to get the feel of the gearing before buying a bigger rear one

i looked at ratio charts and with a 11 is just like adding 4 teeth to rear
 
Last edited:

Chili

Lifetime Sponsor - Photog Moderator
Apr 9, 2002
8,062
15
IndyMX said:
I'm betting it will..

Given how JT cross references each year and bike a part works for I'd be very reluctant to try, especially since it's a $10 sprocket. I'd chalk it up as a loss or ask the seller to make it right.
 

rmrider45

Member
Sep 8, 2008
171
0
well it fit :) the chain is on its way out anyway.. i am just doing this to get the feel of it. if it works ill get a bigger rear sprocket.btw hill climbs like i do will stretch the chain out no matter if it has a 11 or a 12. i am always adjusting slack out of the chain...
 
Top Bottom