v-force delta 2

[braulsy]

I bought a 97 kx250, it had a boysen rad valve in it. No i bought a v-force delta 2, what stock parts do i need to make the install? Thanks for any help.
Ben

 

[RAH RAH]

probably just the intake spigot and a gasket.

 

[danielvagn]

on most bikes the rubber intake have to be modified to fit with the V-force. it is not a big job it can be done with at small saw or a sharp knife. by the way the V-force works great a had in my old machine but now I am on a 4-stroke. good luck

 

[Senior KX Rider]

You should not have to cut anything on the KX. Just put a fresh gasket on. You will need the oem intake spigot if it has a Rad valve on it

 

[braulsy]

You should not have to cut anything on the KX. Just put a fresh gasket on. You will need the oem intake spigot if it has a Rad valve on it

Thanks for the help guys!
Ben