VForce3 question

[griffbones]

The stock intake system on our bike uses an oring seal on each side for the intake. The VForce3 uses gaskets. I can't find gaskets anywhere, what the heck do I do when it's time to do the top end? Sometimes we do three top ends a summer and I always remove the intake components and exhaust valves and wash things up in hot soapy water. I don't really want to reuse these gaskets numerous times. Do I have to cut my own gaskets, I can but what a pain in the arse that's going to be? What do you guys do?

 

[griffbones]

Ok, I found that I can get the gaskets, but I have to go directly to Moto Tassinari to get them, $2.80 each plus shipping.

 

[IndyMX]

Ok, I found that I can get the gaskets, but I have to go directly to Moto Tassinari to get them, $2.80 each plus shipping.

I'd get enough to make the shipping make sense..

 

[griffbones]

I'd get enough to make the shipping make sense..

That was my thought also, so I am going to order about ten of them, that should get me through a year or year and a half.