My bikes clutch actuator arm ( the one under the ignition cover) has been popping out of position, when checking it out, I found that the clutch basket has a lot of slop in it. I removed and inspected the parts and they all look good except the basket has some minor scrapes on it where the center hub has rubbed on it. The bushing and the bearing that the basket ride on have no wear. I can move the shaft that the clutch assembly mounts on up and down enough to cause concern. I think it is an internal bearing in the center case. Has anyone had a similar problem with a KX?
I change my oil one to two rides and use 80w MTL Maxima.
Bike has about 17 hrs. I think it's a part failure, feels like the bearing the shaft rides on is loose on the left side.
I change my oil one to two rides and use 80w MTL Maxima.
Bike has about 17 hrs. I think it's a part failure, feels like the bearing the shaft rides on is loose on the left side.