06 crf450r piston,cam, head mod suggestions?

Rumz

Member
Oct 13, 2002
31
0
im going rebuild it. i was thinking about 13:1 cp piston, 02 crf450r cam, and sending the head to eric for rebuild/porting. has anyone done this or know how much different it would run? and also if i could run pump gas with thay set-up. it is currently a completely stock bike.
 

Rich Rohrich

Moderator / BioHazard
LIFETIME SPONSOR
Jul 27, 1999
22,839
16,904
Chicago
What characteristic of the current power band are you trying to change or improve?
 

Rumz

Member
Oct 13, 2002
31
0
since its time for a rebuild, id like to have a little more of the same type of power. i dont want to lose any bottom end. i want strong low rpm power. i want it to get traction, no 2 stroke hit to break traction, pull hard all the way to rev limiter. is that asking too much?
 

Rich Rohrich

Moderator / BioHazard
LIFETIME SPONSOR
Jul 27, 1999
22,839
16,904
Chicago
Skip the 02 cam, run a Hot Cams Stage 1 instead and do rest and you'll be really pleased with the end result.
 

brucegregory

Member
Jan 26, 2008
1
0
mods

i have many mods to my 08 crf450r i was reading on thumper talk eddie sisneros dynoed a crf450r with a 13.5:1 J&E piston MRD exhaust and a stage 3 cam at 56hp stock on these bikes is 48 at rear wheel.stage 2 cam has about 2 hp less but more bottom and mid. i have my bike ported and polished the carb bored to 43.5 mm MRD exhaust vortex ignition 13.5:1 J&E piston and the web cam 921/242 it makes a big difference.the porting is good from 3 to 5 hp and the cam is good for about 1 to 5 hp depending on other mods also i am running pump gas with no problems.
 

Welcome to DRN

No trolls, no cliques, no spam & newb friendly. Do it.

Top Bottom