GhostofSilverider
Member
- Nov 27, 2010
- 22
- 0
The petcock on my KDX 250 SR is leaking in shut position and may be fouling the plugs (3 so far in 3 rides) , it oozes outside as well as one of the screws cannot be tightened (the little screws not the two large ones that bolt the petcock to the tank).
I see this petcock has internal parts you can buy separately,
an o-ring among others.
http://www.cmsnl.com/kawasaki-1991-e1-kdx250_model11820/partslist/F2410.html
Is this model petcock prone to problems, and is there a known fix or should I just try to find the original petcock at a dealership? I also worry about problems installing the new petcock with potential leaks from the steel tank then , if something goes wrong when removing the old parts.
I see this petcock has internal parts you can buy separately,
an o-ring among others.
http://www.cmsnl.com/kawasaki-1991-e1-kdx250_model11820/partslist/F2410.html
Is this model petcock prone to problems, and is there a known fix or should I just try to find the original petcock at a dealership? I also worry about problems installing the new petcock with potential leaks from the steel tank then , if something goes wrong when removing the old parts.