I have a 03 CR 250 set up for woods, I have a 36mm carb and I like how it works, but there is a fitting issue.
The carb is not in line with the intake boot, the carb faces to the right by about 10 degrees, it's also short by about 1/2 an inch.
I can and have stretched it to fit but it's a pain and not IMHO a seal that I'm confident with.
I was wondering if anyone knows of a different boot that might solve the problem.
Tks
The carb is not in line with the intake boot, the carb faces to the right by about 10 degrees, it's also short by about 1/2 an inch.
I can and have stretched it to fit but it's a pain and not IMHO a seal that I'm confident with.
I was wondering if anyone knows of a different boot that might solve the problem.
Tks
