To adjust the compression of the forks, I need a 14mm allen/hex wrench. And the only ones that I can find cost around 20 bucks from Craftsman and others. Is there any where that sell these allen wrenches for a lot less?
I'm no suspention expert, but if you all you need is a 14mm allen wrench, Get a bolt that has a 14mm hex head and bend it 90deg right at the top. Just a thought.
Is there any chance there is a screw insde this 14mm area? I am just asking because my forks have a rubber plug in the 14mm part, and I remove this plug, then turn a screw with a screwdriver.
Kinda OT now, but I looked all over town for a 1/2" drive 14mm Allen to take the forks apart. I was able to get one through McMaster-Carr (www.mcmaster.com) for about $10-12 including shipping, arrived in one or two days.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.