05LS2GTO

Member
Mar 28, 2007
10
0
I just bought 2 98 CR125's that need a little bit of work. I just changed the clutch plates on one of them and I dont know what kind of oil to put back in there. I aint worried about which brand of oil just what type of oil.
On the other bike the kickstart didnt go down and I couldnt even push start it the wheel would just lock up. I took off the clutch cover and started taking the clutch out to see if I would notice anything wrong. after I got the clutch plates out I noticed that the kickstart moved freely now. After noticing that I decided to just put it back together. I got it put back together now and the kickstart seems to move pretty normal now. Anybody know what this couldve been? Do you think it will come back after a few good kicks when I get oil back in this one? Sorry im a noob with 2 strokes :bang: I new I should have stayed with Yamaha :nener:
 

hot125mod

Member
Jan 14, 2007
501
0
bel ray gear saver there is 75 weight and 80 weight stay away from the hypoid it is for shaft drive and the viscosity is different and i can't spell
 

Welcome to DRN

No trolls, no cliques, no spam & newb friendly. Do it.

Top Bottom