The lower bolt for the kickstand fell out already. Is there supposed to be a chain roller down there on that bolt. It fell out within the first 5 miles.
Thanks, Jim
Yes, there is a roller that goes there. I picked up a new XC this week so I'd better check that one also. Some of the other bolts I've checked so far were either too loose or over-torqued.
Thanks for the info, I now see that Gas Gas needs help in the chain roller department, I am putting some real rollers to replace the bolt with a plastic
sleeve.
Jim A.
new EC300 owner
Some of the things on a GasGas that look crude are actually there by design, and work very well, like the chain rollers. Mine are 2 years old, and still good. No bearings to seize, and the play allows them to spin when full of mud. Ride the bike, you'll be amazed at what doesn't break.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.