eagles22793
Member
- May 25, 2008
- 146
- 0
I have a 2000 Yz125 and I have been having some trouble with the clutch. It was acting up on me when I first started it after winter. I would put it in gear and it will stall out so I tightened the clutch up at the lever then the clutch was on too much so I lossened it. Then I got it working great but it could never just stay where it is so it started acting up and will just stall when putting it in gear when I did not adjust anything just ride. I got a new clutch cable and fixed the problem but all of the adjustments are al the way adjusted out and I measured the friction plates and clutch plates and they were all good check for cracks and weak parts still nothing. Can someone put me in the right direction on what to look for or replace?