My clutch cable was worn through the plastic and my lever was pretty worn and loose. The clutch itself was working fine right up to the last ride. Today I installed a new clutch perch/lever and a new clutch cable (97 KDX 220). Even with the free play out of the new cable the clutch would not disengage (rear wheel would not turn with the bike in gear and clutch pulled in). Took the cable off the clutch end. Then used a wrench on the cable tab at the clutch end to pull the clutch all the way in and it still did not disengage. Shifted the tranny into neutral and now it is stuck there. Anybody got clue as to what is wrong/what to do next? :|
TIA for any help.
TIA for any help.