Im starting to think I should have just saved more money & got something newer. About 2 weeks ago we did a full engine job on my Kx. It was running quite rich down low and spluttering before powerband, after playing with air screw & dropping needle 1 notch was running heaps better. Tryed to start this morning, but no go, about 20 kicks, nothing. Leave it for a bit, & fit new plug, 20 more kicks still nothing, I noticed that if I leaned over a bit quite a bit of fuel comming out the overflow, also removed plug & it is soaked in fuel...
Filter looks fine also, please tell me where to start...
Filter looks fine also, please tell me where to start...