Hey guys, just bought my first 2-smoke a 91 KDX250 (newby learning fast) and I have a problem my bike will only idle for around 20sec then stall. I have no adjustment left (screw all the way in) on the idle screw. Its a KEIHIN carby i have cleaned. It has the following specs:
Carb Throttle Valve (slider) 5
Jet Needle:R1368H - Circlip right up the top
Slow Jet:40
Main Jet:145
Air Screw:1.45 turns out
New Air Cleaner
New plug:NGK B8EG
Stock exaust and spark arrestor riding conditions are around 30-35degC and 90-95% humidity. Mainly riding on road in slow traffic then weekends forest riding, so its usualy slow going and the no idle thing is :( getting me down.
Any Ideas please, appreciate it muchly ;)
Carb Throttle Valve (slider) 5
Jet Needle:R1368H - Circlip right up the top
Slow Jet:40
Main Jet:145
Air Screw:1.45 turns out
New Air Cleaner
New plug:NGK B8EG
Stock exaust and spark arrestor riding conditions are around 30-35degC and 90-95% humidity. Mainly riding on road in slow traffic then weekends forest riding, so its usualy slow going and the no idle thing is :( getting me down.
Any Ideas please, appreciate it muchly ;)