I picked up a used wer steering damper. I had the seller just ship it straight to wer for a rebuild. They don't make a mounting kit for my rmx anymore so I'm going to make the bracket that I'll have to weld to the frame, and modify the bracket the damper sits on.
I've got two questions so that I can start making the weld on bracket.
1. What size bolt attaches the damper are to the frame bracket.
2. How big around is the knuckle right above the bolt (for clearance issues i.e. how far does the hole need to be from the bracket).
I know I could just pay the $16 for the weld on bracket from wer, but they said I'd have to trim it to make it work. If I'm going to have to mod it, why not just make it myself.
I've got two questions so that I can start making the weld on bracket.
1. What size bolt attaches the damper are to the frame bracket.
2. How big around is the knuckle right above the bolt (for clearance issues i.e. how far does the hole need to be from the bracket).
I know I could just pay the $16 for the weld on bracket from wer, but they said I'd have to trim it to make it work. If I'm going to have to mod it, why not just make it myself.