VintgeRiderVintageGuy
Member
- Jan 16, 2000
- 26
- 0
I have a 2000 YZ-250, the front brake is dragging. I removed the lever and the top of the master cylinder and it still drags. I believe it is NOT a hydraulic issue. I'm going to pull the caliper off and look at it (and thus also eliminate a dragging front wheel bearing or crap in it).
Ok, I pulled the caliper off, it spins fine with no caliper on it. I tried to slide the caliper on and hold it in my my hand, not bolted on, and it drags like crazy, I really had to SHOVE it on there. I cleaned off the disc with contact cleaner and examined the pucks, nothing weird there. It's like they're either too big or shoved in too far.
Thanks
Ok, I pulled the caliper off, it spins fine with no caliper on it. I tried to slide the caliper on and hold it in my my hand, not bolted on, and it drags like crazy, I really had to SHOVE it on there. I cleaned off the disc with contact cleaner and examined the pucks, nothing weird there. It's like they're either too big or shoved in too far.
Thanks
Last edited: